

ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS some recent atmospheric pressure viscosity measurements at very low temperatures (Giller. Staphylococcus Coagulase positive: Negative Test results regarding the determination of the presence of the following: Minimum and maximum pH, temperature, and salinity levels below or above which the effectiveness of the additive is reduced to half its optimum capacity:ĥ. Optimum pH, temperature, and salinity ranges for use of the additive:ģ. However, with the addition of S-200C, the microbiological data shows a continued viability of microbial incubations over time.Ģ. S-200C is a nutrient bioremediation accelerator and does not contain bacterial cultures or amendments. Listing of all microorganisms by species and percentages in the composition: Percentage (%) Decrease in Weight of Oil on Day 28ġ. 6 diesel fuel, jet fuels, kerosene, lubricating oils, hydraulic oils, and crude oils.īioremediation Agent Effectiveness Test (40 CFR 300.900), Federal Register September 15, 1994: After 15 minutes set to hot sputter for 1200. These hydrocarbons include but are not limited to gasoline, No. Temperature Ramp Results in Air with varying bridge voltages. It is a non-intrusive, cost effective remedy for the cleanup of these hydrocarbons. S-200C is a bioremediation accelerator used for the remediation of hydrocarbon spills or leaks. To remediate a sheen on water, the same application ratio for a surface application is used. The amount sprayed is dependent on the amount of hydrocarbon on the surface you are spraying. On a surface application, the amount to use is approximately 0.1 to 1 pound of S-200C for every square yard of surface area. This allows air to circulate and thereby maintains an aerobic condition. In other words, use 1 pound of S-200C for every 10 pounds of hydrocarbon you are remediating.įor applications on soil contaminated below 1 foot, the soil is turned and the material is applied. The recommended application rate is approximately 10% by volume of the S-200C as compared to the hydrocarbon being remediated. S-200C is a light amber liquid, and as such can be sprayed with traditional liquid spraying equipment, such as pressurized sprayers or backpack sprayers. Recommended shelf life of S-200C is 10 years if kept in the unopened, original container. Optimum storage temperature range: 55✯ - 85✯Ĥ.d.
VISCOSITY OF AIR AT 200C SKIN
In case of contact with skin or eyes, wash with plenty of water.Ĥ.c. Skin and eye contact protective clothing treatment in case of contact: Ventilation of the work place is not necessary.ģ. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS (*RBL Environmental, LLC is the manufacturer and marketer for International Environmental Products) NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT Type of Product: Bioremediation Agent (Nutrient Additive)

USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
